At full capacity after only 14 months in operation. After having started production in our newly built production building in July 2012 we are already beginning to reach the limits of our capacity in the new building.

It gets tight at times despite the 800m² production floor:

It gets especially tight when large areas are needed for producing heat exchangers. Although we only produce on order (not for stock) they require considerable production space. However, the production staff have adjusted to the space situation and are making very good use of the building.

Here the finished modules are stored before installation in their fibreglass housings:

hdt eddy current heat exchanger before final assembly:

Here you can see finished air intake units for installation at the construction site:

This is a special heat exchanger for a swimming pool.

As you can see we can make "small" heat exchangers too. But the "small" exchanger is almost 4 meters long and will be installed in a swimming pool area soon.

The demand is rowing in this area too. Compared to other standard exchangers our exchangers are suited for the aggressive exhaust air in swimming pools due to their corrosion resistant design.

You see, we are well prepared for your order.

And remember to order your heat exchanger now! Then it will be installed in summer/fall 2014 and you will have the benefits in winter 2014/2015. It's already too late for 2013/2014.

But we are not figuring on the energy prices dropping.

That's why our slogan - We don't need to produce energy we're not going to use - will be highly relevant in 2014.

Your hdt and konzept.team